PAGE 4

DECALS:

In this case,  I carefully cut with a cutter the borders of each number to avoid stick transparent-transfer of plastic that accompanies each number or sign,  then, just from the water to the turret, with a drop of water in the turret is sufficient to handle the number although it is necessary to have skill and patience, I followed with slight touches of oil in each number but it is necessary to make it  faster and steady to avoid been removed, then with a clean brush take out the excees of the oil and it will be ready!

COMMANDER FIGURE:

The quality of the Commander is excellent.
* Step 1.- I applied  XF-1 (Flat-black) at the uniform and the gloves  X18 (semi-gloss black)
* Step 2.- Black pastels
* Step 3.- The detail of the Iron Cross XF-2 (Flat-white) and the rest with XF-16 (Flat-aluminium) and border uniform with XF-27 (Flat-red), all applied with dry brush.
* Step 4.- Finally,  I used a wide flat brush to apply oil natural shades with a generous amount of turpentine spirit bidistilled in all face and I used another clean wide flat brush with little turpentine spirit B. to clear the excess of washing

FINISHED:

To finish and to avoid dust damages it,  we needed to protect our model applying Tru-Film in spray (plastic lacquer matte).

CONCLUSION:

This model is quite recommendable and it did not cause any kind of problem , I really enjoyed building my model!.